-
Metal wire drawing machine
2014-10-02 921
It belongs to the pre-processing equipment for the production of standard metal products, with the purpose of drawing and processing wire or bar materials produced and transported by steel manufacture
-
The role of drawing oil in drawing die drawing
2014-09-19 955
The role of drawing oil in drawing die drawingThe drawing oil also plays an important role in the drawing process of the drawing die.Formula for drawing oil:Different materials and requirements requir
-
Quality production standards for wire drawing dies
2014-09-19 968
The quality of the wire drawing die is the main factor that directly affects the quality and cost of the product, so the commercial situation in the market has increasingly strict requirements for the
-
Drawing die aperture structure
2014-09-19 904
The structure of the wire drawing die core can be classified according to its working properties; Entrance area, lubrication area, working area, sizing area, exit area; Five intervals. The inner diame
-
There are several common methods for mechanical wire drawing, including the following
2014-09-19 1144
1. Flat pressure sanding belt drawing:Flat pressure drawing is a common drawing method, in which the workpiece is fixed on the mold, and the grinding sand belt works at high speed. There is a pneumati
-
Classification of brushed stainless steel surface
2014-09-19 1082
There is no consistent classification and terminology for wire drawing treatment. Generally, it is divided into straight threads and tangled threads based on their appearance and function. Straight ha
-
Description of the reasons for the varying degrees of oxidation on the surface of the single filament pulled out by the wire drawing machine
2014-09-19 1069
oneThe temperature of the cooling water in the sealed chamber is too high, exceedingfortyAt a temperature of ℃, the sealed chamber cannot provide the required cooling effect on the monofilament, resu
-
Characteristics and effects of wire drawing technology
2014-09-19 1097
Wire drawing technology is a metal processing technique. In metal pressure processing. The technical processing method of forcibly passing metal through a mold under external force, compressing the cr
-
What is the difference between stainless steel drawing skills and polishing skills
2014-09-19 1104
Drawing is a method of using drawn fabric strips to move back and forth, causing conflicts on the surface of the workpiece to improve its smoothness. The surface patterns are in a straight line shape.
-
The production process of metal wire drawing
2014-09-19 1004
Metal wire drawing is the process of repeatedly scraping aluminum plates into lines with sandpaper, and its primary skills include de esterification, sand grinding, and water washingthreeSome of them.